? faraday technology. as part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice fara087d pag e 1 of 2 feb-00 (b) the SE110-00 is a surface mountable active hybrid module designed to interface philips saa7185 series digital video encoders to 75 w composite (cmps), luma (y) and chroma (c) outputs. use of high performance operational amplifiers ensures minimal differential phase/gain errors and the ability to drive 2.5v into 75 w loads. other features drives two composite outputs and one y/c output accurate factory set gain of 0 db (6 db optional - order se110-60) 75 w output termination resistors provided sin x/x correction for 27 mhz sampling high input impedance - makes interfacing easy dc coupling eliminates tilt problems associated with ac coupling dc offset of encoder output ( due to single rail operation ) is corrected to bring blanking level near zero 24-pin j-lead surface mount package filter specification for each channel end of passband 6.0 mhz passband shape sin x/x sampling frequency 27 mhz amplitude ripple 1 0.5 db to 6.0 mhz, gain 0 db 0.2 db group delay ripple < 10 ns start of stopband 21 mhz stopband rejection wrt 100 khz > 40 db (with sin x/x ) input impedance 100 k w typical output impedance 75 w supply voltage 5v supply current 25 ma per rail (typical) aqueous washable yes package dr00144a 1 measured against sin x/x predistortion curve SE110-00 set-top video post filter
package detail faraday technology ltd. tel: + 44 (0)1782 661501 croft road industrial estate, fax: + 44 (0)1782 630101 newcastle, staffordshire email: sales@faradaytech.co.uk st5 0qz. england. web site: http://www.faradaytech.co.uk fara087d page 2 of 2 feb-00 (b)
|
